ActionTec 11Mbps Wireless Access Point Bedienungsanleitung PDF herunterladen (Seite 115)

112

Actiontec Wireless-Ready DSL Gateway User Manual

2. When the “TCP/IP” window appears, select Edit from menu bar, then select

User Mode.

3. When the “User Mode” window appears, select Advanced, then click OK.

4. In the “TCP/IP” window, select Ethernet from the “Connect via” drop-down

list.

5. Select Using DHCP Server from the “Configure” drop-down list.

6. Ensure the “Use 802.3” option is not checked.

7. Disregard any addresses in the IP Address text boxes. They will be reacquired

when the first connection is made.

8. Click Options and when the “TCP/IP Options” window appears, select

Active. Ensure the “Load only when needed” option is not checked, then click

OK.

9. Close the “TCP/IP” window and when prompted to save changes, click Save.

10. Restart the computer. The TCP/IP settings are configured.

Next, go to “Connecting to the ISP” on page 86.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 124 125

Keine Kommentare

ActionTec 11Mbps Wireless Access Point Bedienungsanleitung Seite 115